motor swap question?
#11
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Location: Dayton, OH
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
It worked fine before, but this is a new sender it seems as if it is working but oil pressure reads low it keeps telling me to check guages even if its not in the red.
#12
Senior Member
Posts like a 4 Banger
Join Date: Mar 2009
Location: Iowa
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
if your wiring is all good and grounds hooked up and your dash was working ok before . you could have a bad sender even though its a new one. i will look on gm at work today for your car to see if there was any */b on it
#13
DINOSAURUS BOOSTUS
Expert Gearhead
What year, make and model of vehicle is this new sensor for? If you picked up one for something other than your car'* year, it may have different resistance.
#14
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Location: Dayton, OH
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Ok thanks 99 BonnevilleGreen. BillBoost 37, my car is a 96 Bonnieville SE, my motor is from a 98 Monte Carlo, the sensor I bought is from a 96 Bonneville SE.
#15
DINOSAURUS BOOSTUS
Expert Gearhead
I was hoping you had the wrong one.
Your best suggestion is to have the pressure checked with a mechanical oil pressure gauge. The motor may have issues that haven't become obvious yet and are showing up as low pressure.
Your best suggestion is to have the pressure checked with a mechanical oil pressure gauge. The motor may have issues that haven't become obvious yet and are showing up as low pressure.
#16
Senior Member
Posts like a 4 Banger
Join Date: Mar 2009
Location: Iowa
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
talk to a tech at work today he said to try unhooking the battery for a few minute'* then hook it back up to see if that clears it up. still do like billboost said to.