Wow,......Damn thing parts my hair now.
So I do the "thing" today after work in 100+ degrees. It wasn't all that cruddy either, but after removing the rather dry stuff with a medium stiff brush and then vacuuming it out I then used some electrical contact cleaner to spray the evap down the tiny 2x3 inch hole left by removing the fan resistor assembly and voula,..... nice clean shiney aluminum. i spray some soapy water solution on after just to cut the residue from the contact cleaner,....... God know what that stuff is anyway? just to be on the safe side. After all that............ It works great. Thanks again for you help Gents. Catcha' Later, Chillin' in So. Oregon, Brian