Shifter light's
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Indiana
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Shifter light'*
I have a 1997 SSE,How do I change the lights under the gear selector in the console??1,2,3 I can just almost see in the dark...[img][/img]
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by Roysssei
change the relay...
IIRC these are fiber optical from a signal bulb below.
#4
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
#6
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
I'm pretty sure the shifter assembly was revised between 95 and 97. Although that could be the answer.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by Roysssei
The one that controls the shifter lights...read you codes
#9
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Indiana
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I'm talking about the lights that come on with the lights under the p-r-d-3-2-1,not the dot next to them...it works fine....under the 1,2,3 looks burned out but i cant find a way there....
#10
DINOSAURUS BOOSTUS
Expert Gearhead
Ohhhhhh
Should be a bulb or two on the assembly. I think if you lift the front of the console (remove shifter **** and screws under ashtray) there are two little bulbs.
Should be a bulb or two on the assembly. I think if you lift the front of the console (remove shifter **** and screws under ashtray) there are two little bulbs.
Thread
Thread Starter
Forum
Replies
Last Post
PRD2BDF
Detailing & Appearance
9
01-04-2006 09:37 AM