How-to remove front fenders?
#1
Senior Member
True Car Nut
Thread Starter
How-to remove front fenders?
Anyone know how to remove the fender? ( without damaging it but not takin the whole day to tear everything apart to make room to get to 1 screw )
#2
Senior Member
Certified GM nut
Join Date: Apr 2003
Location: Davison,Michigan
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
#4
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Remove corner light.
two 10mm bolts behind corner light.
Remove tire.
Remove fender liner.
three 10mm bolts on top
two 10mm bolts at the bottom.
one bolt going up and down, one going front to back between the wheel and the door, inside the fender.
That'* correct for plastic fenders.
two 10mm bolts behind corner light.
Remove tire.
Remove fender liner.
three 10mm bolts on top
two 10mm bolts at the bottom.
one bolt going up and down, one going front to back between the wheel and the door, inside the fender.
That'* correct for plastic fenders.
#5
Senior Member
True Car Nut
Thread Starter
Thanx Damenorder.. hopefully I will remember that in 2 weeks time
But the bolt you say that goes up and down and side to side.. are they well hidden and or they need a long extension bar?
But the bolt you say that goes up and down and side to side.. are they well hidden and or they need a long extension bar?
#7
Senior Member
Posts like a Corvette
Join Date: Nov 2003
Location: Brunswick, Georgia, USA, North American Continent, Earth, Milky Way Galaxy
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
lol, already been through that little project Did both of 'em too, then had to put them back on! Thank God I had my Dad'* help; he works on heavy machinery, but he'* a great all-around technical person Still, it was quite the project figuring it all out though. Wish I'd asked here before diving in :P
#8
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
I had no books when I did this the first time, Took me a full hour and pissed me off looking for bolts Ask anything you're not sure of, with 200ish active members someone is bound to know.
Thread
Thread Starter
Forum
Replies
Last Post