How do I disable the TCC
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
How do I disable the TCC
I need to know,
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
#2
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do I disable the TCC
Originally Posted by UserBrett
I need to know,
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
http://www.bonnevilleattitude.com/fo...e184b482b2045b
#4
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do I disable the TCC
Originally Posted by DeathRat
Originally Posted by UserBrett
I need to know,
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
How do I disable the TCC and have All gears.
Any ideas.
What wire controls the TCC?
Pin # on ECM?
A-f on auto tran sol?
This is for Diagnostic testing only.
http://www.bonnevilleattitude.com/fo...e184b482b2045b
Thanks Death Rat that is good info.
After reading it looks to me that the TCC will not engage
In D but only in OD. Is this true?
I finely got a 39 code after a year of my car missing
under load.
If the TCC is not engaged in D and my car is missing
(which it does) I am assuming the TCC is not at fault.
Unless the TCC is not disengaging or is engaging in D.
I don’t think this is the case.
A scan tool showed it was working about a half a year ago.
To bad I don’t have one know.
I guess I could look at pin f ALDL
Well anyway.
Wouldn’t this cause a lot of problems (stress) with the TCC engaged in OD?
I have done a lot of cruising and when in OD
The missing was bad enough (I think) it messed up the TCC lock.
ECM transaxle abuse.
Also I am trying to find out more about the PWM.
Oh well I still working on this.
This is a good site to look at
http://autorepair.about.com/library/.../aa061701l.htm
Thread
Thread Starter
Forum
Replies
Last Post