SES light came on...Code 54
11-01-2003, 03:35 PM
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
SES light came on...Code 54
I looked in the Techinfo and there was no code 54, but thats what i counted, it runs just fine, i was driving, the light came on, then 25 minutes later it shut off, so this morning i did that paper clip trick with it, Any one know?
11-01-2003, 07:01 PM
#2
Junior Member
Posts like a Ricer Type-R
Car 54, where are you?
Oh.....CODE 54. Gotcha. You have the digital EGR. Clean the solonoid shafts and springs, then lube them. Probably just stuck. Most of us have had that at least once. That was used from 91-93, except on the EGR-less NA 92'*.
Oh.....CODE 54. Gotcha. You have the digital EGR. Clean the solonoid shafts and springs, then lube them. Probably just stuck. Most of us have had that at least once. That was used from 91-93, except on the EGR-less NA 92'*.
11-02-2003, 12:44 AM
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
okay but how do i clean the solniod shafts and lubricate the sping...?
11-02-2003, 01:17 AM
#4
Junior Member
Posts like a Ricer Type-R
wd-40 is a good solvent, but a shitty lubricant. clean with it, and use a graphite based lube on the shafts and springs when ypo're done. Use a toothbrush (mom'*) and q-tips (sister'*).
Thread
Thread Starter
Forum
Replies
Last Post