What to change for a good tune-up?
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: May 2007
Location: Belmont, Wv
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
What to change for a good tune-up?
I've got 81,500K on the N/A motor
I just did the oil and filter...
Thinking I need to do Plugs and Wires, PCV, Fuel Filter, Air Filter....
What else do I need to check/change?
Is there any brand that gives more performance thats not expencive?(more for plugs and wires)
I just did the oil and filter...
Thinking I need to do Plugs and Wires, PCV, Fuel Filter, Air Filter....
What else do I need to check/change?
Is there any brand that gives more performance thats not expencive?(more for plugs and wires)
#2
Junior Member
Posts like a Ricer Type-R
AC Delco or NGK plugs. Never Bosch.
Belden Premium wires from NAPA.
O2 sensor (front only) if it'* original. They start getting tired around 60k.
Pull the TB (per Techinfo) and clean it, the MAF sensor, and the IAC valve/passage/seat.
Belden Premium wires from NAPA.
O2 sensor (front only) if it'* original. They start getting tired around 60k.
Pull the TB (per Techinfo) and clean it, the MAF sensor, and the IAC valve/passage/seat.
#3
Member
Posts like a V-Tak
Join Date: Feb 2003
Location: Hobart, Indiana
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
If you clean the TB, make sure you clean the IAC, cleaning mine helped with the rough idle, and Im getting 2 more MPG...
Ditto on everything else Delco plugs, Belden wires=smooth runner
Bob
Ditto on everything else Delco plugs, Belden wires=smooth runner
Bob
#5
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: May 2007
Location: Belmont, Wv
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonnevillesSince62
Have the LIM/UIM things been addressed?
I just bought it so I don't know what has been done or not.
#6
Junior Member
Posts like a Ricer Type-R
Thread
Thread Starter
Forum
Replies
Last Post
notagrampa
Performance, Brainstorming & Tuning
5
05-17-2008 04:53 PM
repinS
General GM Chat
12
11-26-2004 10:35 AM