hub/bearing assembly broke apart, stuck in knuckle
#12
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2010
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Dan-- I have a half dozen jpegs to upload, but they are each about 3 MB, and the size limit is about 1/2 MB. Sorry I don't know much about manipulating photo files.
#13
Do you have a photobucket account? I'm with Dan, having a hard time picturing it.I've found stubborn hub assemblies are usually freed up with some heat from a torch and some tapping from my air hammer. When all else fails I bust out the big sledge.
When putting in the new one I coat the inside of the spindle with axle grease for if I have to remove ir in the future.
When putting in the new one I coat the inside of the spindle with axle grease for if I have to remove ir in the future.
#14
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Ya, try photobucket. Then you can choose the link to put the image in a message, and put that link here. I've had a axle here that didn't come out for nothing. I disconnected it from the transmission and removed the hub and axle together.