hi im having trouble to find the way to remove the evaporator of my bonneville
1997; i try under dash but no resuts. someone could help me and tell me the best way

if i remeber correctly the evaporator for the A/C system is is the aluminum cylinder that is under the hood on the passenger side by the strut tower. if you have coolant puddling in the cabin of the car on the passenger side that would be the heater core which is midway up the firewall encased in the climate control air ducting.

:( thanks tan96 , the aluminun cilinder you refer is the accumulator or dryer , what i try
to remove is the evaporator that shoud be under the cabin and would be toguether
with the heater core, the problem is that i dont know step by step instruction to to remove it.

Hi, i did one many many years ago on a 92 bon. It was difficult!!!! I beleive I had to cut some of the firewall to remove it.

I CHECKED A 96 SE FSM, BASICALLY YOU HAVE TO REMOVE EVERYTHING BLOCKING ACCESS TO FIREWALL IN VICINITY OF THE BLOWER MOTOR. INCLUDES AC ACCUMULATOR (AFTER FREON RECOVERY,ETC), ALTERNATOR, CROSS CAR BRACE, MAXI FUSE/RELAY CENTER, BLOWER CONTROL MODULE, BLOWER MOTOR, AC LINES, ACCUMULATOR BRACKET, HVAC HEAT SHIELD (MINE HAD ALREADY CRUMBLED AWAY), THEN!!!!!! CUT FIREWALL ALONG DOTTED LINES AND REMOVE HEATER AND EVAPORATOR MODULE ASSEMBLY. I LEFT OUT THE REFERENCES AS TO HOW TO REMOVE EACH ITEM BUT IT SEEMED STRAIGHT FORWARD. ALSO DON'T KNOW IF 96 FSM APPLIES TO YOUR CASE. GOOD LUCK!

oops! forgot to use lower case again. sorry adm and mods.

thanks GMMAN; I 'M GOING TO BEGIN TOMOROW MORNING DOING THIS HARD
WORK , I APPRECIATE YOUR HELP .