engine compatibilty
#1
engine compatibilty
I have a 95 bonneville series 2 3800.The person i bought the car from droped a series 1 3800 short block in it . Will the series 2 heads and intake bolt up to the sreies 1 block or do i have to pull the series 1 block back out and find a series 2 block?
#2
Senior Member
Posts like a Camaro
Join Date: Apr 2006
Location: maitland fl
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
no. not really.
the series one block is different from the series two block. there is one person adapting the s2 top end onto a tall deck block, but i cannot remember who it was or what became of it.
the series one block is different from the series two block. there is one person adapting the s2 top end onto a tall deck block, but i cannot remember who it was or what became of it.
#3
Junior Member
Posts like a Ricer Type-R
No. The Series 1 and Series 2 are completely incompatible in nearly every part. Heads will not swap, intakes will not swap.
Get on that swap to the correct motor. I'd imagine your fueling and shift points are all screwed up.
Get on that swap to the correct motor. I'd imagine your fueling and shift points are all screwed up.
Thread
Thread Starter
Forum
Replies
Last Post