tranny line size question
07-25-2005, 01:29 PM
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
tranny line size question
The rubber line going from the one metal trans line, all the way up to the other metal connector on the cooler, its about 3.5 feet long and has c-clamps on both sides of it, what size opening is it? 1/4inch?
07-25-2005, 01:37 PM
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
the dealer ones are the ones that the rubber line goes into the metal flare, whcih is then threaded into the trans or the rad. i think.
07-25-2005, 03:02 PM
#4
Senior Member
Posts like a Turbo
Join Date: Jul 2003
Location: Markham, Ontario, Canada
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
The all metal line that goes into the lower rad is about C$12. The metal/rubber line that goes into the transmission is about C$30 at the dealer. You can buy the generic metal line and bend it yourself, but I didn't it was worth the trouble.
These lines tend to rust out.
These lines tend to rust out.
Thread
Thread Starter
Forum
Replies
Last Post