1993 Bonneville SSEi codes 17, 18, and 23
05-23-2011, 06:33 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
1993 Bonneville SSEi codes 17, 18, and 23
i just bought a 93 ssei with engine in pieces, i put the heads ,intake and supercharger on the car, while trying to start found a broken gas line on the body of car, fixed it so it holds pressure, car will start holding throttle wide open, sounds like its running on 3or 4 cylinders, codes are 17, 18, and 23.....let the game begin
05-23-2011, 08:35 PM
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
17 cam position sensor fault
18 crank or cam sensor error
23 intake air temp sensor out of range, low
Sounds to me like you don't have something plugged in right. Start by going over the wiring harness.
18 crank or cam sensor error
23 intake air temp sensor out of range, low
Sounds to me like you don't have something plugged in right. Start by going over the wiring harness.
05-23-2011, 10:51 PM
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
thanks dan, i can tell you everything is plugged in correctly, but i cant say there isnt a broken wire in the harness some where i cant see, just for fun i did replace replace cam sensor....no change, car only runs at wide open throttle but sounds like only 3 are working.....
Thread
Thread Starter
Forum
Replies
Last Post
kwl2619
Performance, Brainstorming & Tuning
2
08-13-2003 10:54 PM