Fender Fix
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2004
Location: Nebraska
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Fender Fix
I was just wondering if any one knows if you can pull out a Bonneville fromt fender appears to be plastic?? Our is not cracked just pushed in and we can not get passenger door open and would like to fix it. I just got the car and am not sure what to do Any help or suggestions would be a big help
Thanks
Dawn
Thanks
Dawn
#2
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure how yours is in, but on my 93 se, when i was installing the fender i had door issues too, where is your fender tight? there are three mounting points at the rear of the fender, one about 3" from the top, one at the top of the trim, and one you can see in the bottom.
If it is pushed in in the middle, you will need to remove the inner fender and straighten the middle support bracket
BTW, go into your Profile, Upper right, and add your year and trim level to your signature.
If it is pushed in in the middle, you will need to remove the inner fender and straighten the middle support bracket
BTW, go into your Profile, Upper right, and add your year and trim level to your signature.
#4
Junior Member
Posts like a Ricer Type-R
If the fender is tweaked, you'll have to straighten out the support brackets mentioned above, and replace the fender if there'* any permanent damage. 92-95 used plastic. 96-99 is sheetmetal.
Thread
Thread Starter
Forum
Replies
Last Post
ajgullery
1992-1999
12
02-26-2007 02:00 PM
64bonneville
Classics (Star Chief and 1957 to 1986)
2
04-06-2004 12:51 AM