climate control
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
climate control
i got a 94 ssei. it flashes when i start the car, or just have the switch on, i found the diagnostics for 88-93, does the 94 have a different procedure? i replaced the air mix actuator today but still it is flashing, any one have any ideas? thanks
#2
Senior Member
Posts like a 4 Banger
On a '92, to get the codes out:
turn ignition on
press ECC "off" & "temp up" simultaneously
codes should come up on the display.
code "66" means low freon
press "off" for next code
Press "off" a couple of times to take it out of the code disply mode.
LMK if there are other codes
turn ignition on
press ECC "off" & "temp up" simultaneously
codes should come up on the display.
code "66" means low freon
press "off" for next code
Press "off" a couple of times to take it out of the code disply mode.
LMK if there are other codes
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Yes, 94 is a differnt procedure. It'* an obd 1.5 year. This means most OBD2 scanners won't read engine codes. You need one that specifically would.
And the climate control, I doubt you can see them with a regular scanner or pull them from the climate control on your own.
And the climate control, I doubt you can see them with a regular scanner or pull them from the climate control on your own.
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
the procedure bob described above does work on my 93 ssei, but the 94 does not respond to any of the three buttons ive tried, i do have a code reader its the auto xray 2500 but it will not read the codes from abs system or the hvac system
#5
Senior Member
Posts like a Turbo
Join Date: Mar 2009
Location: Richmond,Va.
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
My understanding is that you cannot read the HVAC codes. That is a dealer item. When you replaced the air mix actuator was it new or salvage? I just replaced mine (95 SSEI) and the first one was from a j/y and I failed to realize that if you can move the lever it is broken.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
it was one from my 96 se , i know it worked plus i took it apart and made sure the gear was not broke, my heater works now, before it was stuck on hot, but with the flashing it tells me somethings not right i was just wondering what it is, every thing seems to work though
Thread
Thread Starter
Forum
Replies
Last Post
andereck
2000-2005
3
08-10-2006 10:58 PM