Ignition problems , stalling , tow trucks
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2002
Location: Troy, Oh.
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Ignition problems , stalling , tow trucks
My '98SSE has an intermitent ignition thing happening. 6 months ago I replaced the ignition module the one under the coil packs. Its been replaced 2 more times since . Last week was the last.
Symptoms are it quits running just going down the road various speed , cold - hot didn't matter. Won't restart . Towed the last time. It restarted the next morning before I got to parts store for the replacement.
Dealer service writer sayed it might be crank position sensor and that the module is probably not bad. But it did run for months after replaceing it ??????????? There was no spark on first diagnoses 6 months ago same symptons every time since.
Plus the oil pressure has been running very high 80 + ? Can't figure that one out eather. Using 10W30 and its changed almost every 3K... Maybe just the sending unit..
Any ideas ??
Thanks Stan
Symptoms are it quits running just going down the road various speed , cold - hot didn't matter. Won't restart . Towed the last time. It restarted the next morning before I got to parts store for the replacement.
Dealer service writer sayed it might be crank position sensor and that the module is probably not bad. But it did run for months after replaceing it ??????????? There was no spark on first diagnoses 6 months ago same symptons every time since.
Plus the oil pressure has been running very high 80 + ? Can't figure that one out eather. Using 10W30 and its changed almost every 3K... Maybe just the sending unit..
Any ideas ??
Thanks Stan
#3
Senior Member
Posts like a Turbo
Join Date: Mar 2003
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
does an ignition midule still go bad on a 94? can you test it by pulkling the plugs after starting the car?
how hard is the crank sensor to replace?
is it the same as the can sensor?
how hard is the crank sensor to replace?
is it the same as the can sensor?
Thread
Thread Starter
Forum
Replies
Last Post
bill buttermore
General GM Chat
3
08-21-2007 11:52 AM