heyeveryone i finally isntalled my clear side markers. mixed feelings at a glance they look great but if your up close and staring at them 1/2 1/2 its just kinda wierd i think cause its metal w/ a orange bulb in the center. I am going to finda new bulb thats clear then orange when they are lit as well as the parking lights .

Ill have pics in a week, film has to develop and i have to start a new webpage w/ just bonny stuff.
BTW it took me about 2 hours to complete just 1 light but1 for the other. i used a dremel cutoff wheel silicon and a screwdiver to pry stuff. I think i might go to the juhnk yard for another set of side markers to make another set of PERFECT ones.

Did you "clear-ify" the sidemarkers yourself, or did you purchase them somwhere? If so, where?

I'd recommend LEDs to replace the amber bulbs: they're clear when off and amber when on.

Can't wait to see the pics!

Cheers,
Jeff

Ill ahve pics and a step by step process for ya in a week or so. Ill keeop yall posted

where do you get these clear side markers from?

Check my website for details.
all the info ya need.
http://99bonny.tripod.com

by the way, I noticed in past pics that you had blackouts over the front lights, where can I find those?

you can buy the 92-95 bonneville headlight covers and then use a dremeltool to cut to fit n a later model 96-99 bonny. Also velcrow is a great help when u cut the top tabs off the smoked cover.
btw it wont be perfect but it'* as close as we can get. hth

I need a clear headlight cover for a 97 SSE, driver side.
Any suggestion on where I might find one?

if your talking about teh plastic covers then they dont make them.
But if your talking about the glass housing the lights are in then a junk yard would be your best bet.
hth

yes, it comes as one entire unit. Quite expensive from the dealership. If you can find a nice clean one at a junk yard, go for it.