1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Car wont start! Please help

Thread Tools
 
Search this Thread
 
Old 03-01-2004, 12:25 AM
  #1  
Junior Member
Thread Starter
 
shayrgob's Avatar
 
Join Date: Jan 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
shayrgob is on a distinguished road
Default Car wont start! Please help

Im positive its not the battery/cables. When u try to turn the car on, all it does is click. Could it be the stareter? And if it is the starter do u have to use spacers at all? thanks
Old 03-01-2004, 12:37 AM
  #2  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Did you change the starter, or did this just start happening?

Check the cables at the starter for corrosion, and check the battery negative cable where at both ends. Remove them and clean them.

What year and model? Please put that info in your signature.
Old 03-01-2004, 05:29 AM
  #3  
Senior Member
True Car Nut
 
GAMEOVER's Avatar
 
Join Date: Aug 2003
Location: Racine Wi
Posts: 5,146
Likes: 0
Received 0 Likes on 0 Posts
GAMEOVER is on a distinguished road
Default

spacers as in shims?
well you can get your starter rebuilt so you can use the same shims that if you even have any and if thats your problem
Old 03-01-2004, 10:59 AM
  #4  
Junior Member
Thread Starter
 
shayrgob's Avatar
 
Join Date: Jan 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
shayrgob is on a distinguished road
Default

Its not the cables b/c i checked them. ITs a 92 ssei. Im just a little confused about the shims that i have to use? Can someone clear that up for me.
Old 03-01-2004, 11:04 AM
  #5  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

I answered that in your other post......I'll delete that one and answer here. If you had no shims before, don't use any. If you had shims on the old starter, put them in in the same manner.

If in doubt, remove the starter, but leave it connected. Crank the car. Still get nothing but a click? It'* not the shims (you may need to run a ground wire from the body of the starter to the frame to make this work).
Old 03-01-2004, 12:14 PM
  #6  
Junior Member
Thread Starter
 
shayrgob's Avatar
 
Join Date: Jan 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
shayrgob is on a distinguished road
Default

And another thing, When i took off the starter it looked like the gears were all torn up and didnt really look right and it never seemed like it fully engaged into the flywheel.
Old 03-01-2004, 12:16 PM
  #7  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

The gears on the old starter were chewed up? Or the flywheel? In that case, you may want to start adding shims until it engages right. But try the 'removed' test first. And make sure your battery has a full charge. Make sure it kicks out and spins.
Old 03-01-2004, 04:54 PM
  #8  
Senior Member
True Car Nut
 
acg_ssei's Avatar
 
Join Date: Sep 2002
Location: Chicago, IL
Posts: 2,409
Likes: 0
Received 1 Like on 1 Post
acg_ssei is on a distinguished road
Default Re: Car wont start! Please help

Originally Posted by shayrgob
Im positive its not the battery/cables. When u try to turn the car on, all it does is click. Could it be the stareter? And if it is the starter do u have to use spacers at all? thanks
Hang on; we need to clarify something here:

If you're hearing precisely one *click* followed by dead silence, it sounds like your solenoid is engaging but the starter is doing nothing.

If you're hearing a series of rapid-fire clicks, it may be just a weak battery: the starter is turning, but doesn't have enough power to actually engage the flywheel, and instead you're just hearing the pinion slipping its teeth on the edge instead.

So, which is it?
Old 03-02-2004, 09:02 AM
  #9  
Junior Member
Thread Starter
 
shayrgob's Avatar
 
Join Date: Jan 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
shayrgob is on a distinguished road
Default

its the series of rapid clicks.
Old 03-02-2004, 10:48 AM
  #10  
Senior Member
True Car Nut
 
acg_ssei's Avatar
 
Join Date: Sep 2002
Location: Chicago, IL
Posts: 2,409
Likes: 0
Received 1 Like on 1 Post
acg_ssei is on a distinguished road
Default

Originally Posted by shayrgob
its the series of rapid clicks.
Okay: weak battery and/or loose or dirty cables. Check _both_ ends of the battery cables to ensure that they're clean and tight, and that the battery can hold a charge.


Quick Reply: Car wont start! Please help



All times are GMT -4. The time now is 08:05 AM.