Cradle Bushing
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Feb 2009
Location: Jersey Shore
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Cradle Bushing
So I need to replace some cradle bushings but I can find the parts anywhere. where can I find them I also need the big washer/retainer. Thanks alot guys.
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Have you checked at Auto Parts Fast at RockAuto Try sending a PM to billboost, I'm sure he knows where to get them. Otherwise Jegs or summit racing.
#3
Senior Member
Posts like a Turbo
Join Date: May 2005
Location: Fredericton, New Brunswick.
Posts: 380
Likes: 0
Received 1 Like
on
1 Post
Them suckers aren't cheap at the dealer! After all my rear ones rotted out, I decided to bite the bullet and replace them all. I had to replace the upper washer, donut, bottom donut, and the lower washer. That and there are 4 back there!! I had to cut holes in the floor to get at them. I also had to weld new steel onto the subframe itself it was that badly rotted. I think it cost 300 to 400 for the mounts! OUCH! After that, it felt like driving a new car!
Last edited by Timothy's Buick; 10-29-2009 at 09:36 PM. Reason: added a little more
#5
DINOSAURUS BOOSTUS
Expert Gearhead
https://www.gmforum.com/t273437/
Justin.. if you want, I typically get near cost at the dealer. Toss me your VIN and I'll go see Pete the parts guy.
I did them all the bushings on my car. Made a huge difference in handling and tightening up the car.
Got washers at the JY...not ideal but if they are still good...hadn't noticed one or two of mine were in poor shape.
Justin.. if you want, I typically get near cost at the dealer. Toss me your VIN and I'll go see Pete the parts guy.
I did them all the bushings on my car. Made a huge difference in handling and tightening up the car.
Got washers at the JY...not ideal but if they are still good...hadn't noticed one or two of mine were in poor shape.
Thread
Thread Starter
Forum
Replies
Last Post