ecm trouble code 58??
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
93 , i finally found info on net saying "trans temp high" i been having trans issues .
http://www.bonnevilleclub.com/forum/...ic.php?t=44695
any possiable relation????? said it sent signal to cotrol tcc/vss ????
http://www.bonnevilleclub.com/forum/...ic.php?t=44695
any possiable relation????? said it sent signal to cotrol tcc/vss ????
#4
Junior Member
Posts like a Ricer Type-R
Not with a 93 PCM. There is no trans temp function until 94.
58 is a passkey (VATS) code. And as mentioned, a known bug in the 92 pcm, however with your application, we'd need to know alot more of your setup and how you bypassed the system to help you diagnose.
58 is a passkey (VATS) code. And as mentioned, a known bug in the 92 pcm, however with your application, we'd need to know alot more of your setup and how you bypassed the system to help you diagnose.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
ok the pass key makes sence. Bypassing is very simple not really even bypassed. I took pass key wire from computer tap it to ground at start up . it starts tuck wire away never need to do again unless disconnect batt..
Thanks for info , I check tranny fluid it is nice and red looks like new..... iguess ill need to drop pan and see whats in borttom of it.
Thanks for info , I check tranny fluid it is nice and red looks like new..... iguess ill need to drop pan and see whats in borttom of it.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
thanks for info. Iguess time for another trans doesnt hurt to have spare,, a few months ago when we changed filter/fluid there was excessive amounts of clutch material in pan,
Thread
Thread Starter
Forum
Replies
Last Post