a lil problem here
08-29-2006, 02:23 AM
#2
Senior Member
Posts like a Supercharger
Join Date: May 2006
Location: Vancouver
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Install some springs.
Make up some cables that you can pull and anchor the trunk lever to stay open once you've unlocked it.
Add some weights to the lever.
If all else fails, remove the bricks from the truck lid.
Make up some cables that you can pull and anchor the trunk lever to stay open once you've unlocked it.
Add some weights to the lever.
If all else fails, remove the bricks from the truck lid.
08-29-2006, 03:52 AM
#3
Senior Member
True Car Nut
A spring may have gotten weak, broken, or unhooked. If your springs look connected and unbroken, consider changing them for a set on a car with a spoiler from a junkyard.
[edit:
Geez, thanks for contributing to my continuing education, Boosty - I didn't realize the spring bars could be adjusted! Good to know.]
[edit:
Geez, thanks for contributing to my continuing education, Boosty - I didn't realize the spring bars could be adjusted! Good to know.]
08-29-2006, 06:55 AM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Game.. In the trunk there are two rods that control the tension and keep the trunk open and pop it.
When you look in by the hinges, you should see two rods (one on each side) sticking down. You can adjust them if careful. Try adjusting one side by one space then if necessary adjust the other side as well.
When you look in by the hinges, you should see two rods (one on each side) sticking down. You can adjust them if careful. Try adjusting one side by one space then if necessary adjust the other side as well.
08-29-2006, 12:28 PM
#7
DINOSAURUS BOOSTUS
Expert Gearhead
To add and answer that last question a little better. Yes.. you can adjust it so that the lid nearly takes flight. I'd suggest against this, after a while.. you start to wonder what support structure you are damaging when this heavy lid slams up.
08-29-2006, 02:09 PM
#8
Guest
Posts: n/a
Originally Posted by BillBoost37
I'd suggest against this, after a while.. you start to wonder what support structure you are damaging when this heavy lid slams up.
08-29-2006, 02:20 PM
#9
Senior Member
Posts like a Corvette
Join Date: Aug 2005
Location: Michigan
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Alright, I like trunks that do that, but since you guys suggest against it, I wont. I would guess that cars that come from the factory that have the trunk lid go all the way up are accounted for those problems.
08-29-2006, 02:25 PM
#10
Guest
Posts: n/a
Originally Posted by 92BonneSE
Alright, I like trunks that do that, but since you guys suggest against it, I wont. I would guess that cars that come from the factory that have the trunk lid go all the way up are accounted for those problems.
