well i pulled everything apart pretty easy i will post some pics and i would like you guys to tell me what you think. I noticed that there was oil on the threads on every LIM bolt as Justin said make sure to use thread sealer now i know why. I feel like since i am this far in i should pull the heads but i dont have the money or extra time to do so just everything is out of the way. I will also be doing the valve cover gaskets and grommets does anyone have anything else they suggest i do i noiced that my oil cooler lines are leaking pretty good as well so i will have to do those soon. so please check out the pics i know there not the best but i am not the best with a camera just let me know if you think this would cause coolant or oil to leak into the motor causing smoke thanks agin .

sorry i guess i dont know how to post pics but if you right click on one of them and click on open in new tab it should bring it up if not let me how to post them the right way so i know thanks

where do you have pics uploaded to? on photobucket you click the thing that says direct link then click the yellow box on the reply window and right click the box that comes up and paste the link there and hit ok

thank you just for helping me learn how to post images

thank you *Justin* for helping me learn how to post images

Yea, I'd say your gaskets were pretty bad. I have seen worse though.

anytime. my gaskets looked like that too. are you going to plug the coolant ports for the throttle body?

I want to! do you think if I cleaned it out good and used a bunch of jb weld it would work or do you have to use bolts