'94 SSE Removing Throttle Bottle?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2004
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
'94 SSE Removing Throttle Bottle?
I have two bolts that are sitting behind a piece of the out take manifold. I need to get at these to remove the TB, but how?
#2
Junior Member
Posts like a Ricer Type-R
You're going to have to be a bit clearer on your description. There are 3 studs with nuts holding your TB to your upper intake. There are also a couple nuts that have to be removed from the heads to get the crossover pipe heatshield out of the way in order to remove the TB bracket. Can you take pics of what bolts are giving you trouble?
If this has anything to do with switching to a Series 2 upper intake and TB like you mentioned in another post here, give up and put it back together. It'* not possible.
If this has anything to do with switching to a Series 2 upper intake and TB like you mentioned in another post here, give up and put it back together. It'* not possible.
Thread
Thread Starter
Forum
Replies
Last Post
singscountry1967
Detailing & Appearance
10
08-28-2005 08:08 PM