Coolant is disappearing, but not on ground or in oil
#21
Senior Member
True Car Nut
Nice going, Bigfoot. Thanks for reporting how it all turned out. Glad to hear that you were pleased with the APN kit. I think you will have a good shot at that 300K goal now!
#22
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2006
Location: Indy
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Thx, Bill.
The engine really seems strong. Cleaning the fuel injectors really smoothed it out too.
We have a shop here in Indy that uses an ultrasound techinique to clean them. He said one of mine was only capable of outputting 60% of the needed volume, and the others were all at 90% or less. He brought them all up to spec for $150, which I hear is a good price.
I really enjoy driving it again.
I still have a tranny issue in that the TCC won't stay locked above 2000 rpm. I believe that is also causing the OD to not engage. My guess is the valve body needs to be replaced but that is a bit out of my league. Not sure what to do at this point. I might take it in to Aamco???
The engine really seems strong. Cleaning the fuel injectors really smoothed it out too.
We have a shop here in Indy that uses an ultrasound techinique to clean them. He said one of mine was only capable of outputting 60% of the needed volume, and the others were all at 90% or less. He brought them all up to spec for $150, which I hear is a good price.
I really enjoy driving it again.
I still have a tranny issue in that the TCC won't stay locked above 2000 rpm. I believe that is also causing the OD to not engage. My guess is the valve body needs to be replaced but that is a bit out of my league. Not sure what to do at this point. I might take it in to Aamco???
#24
Senior Member
Posts like a 4 Banger
Join Date: Oct 2009
Location: Minnesota
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to bring up an old thread, but I cant find any mention of this APN upper intake manifold kit anywhere for sale on the interweb. Anyone have a link of where to buy??
Thanks!
Thanks!
#25
Retired
Geez, I just spent the last 10 minutes trying to find it myself. This part is hard to track down...
GM Intake Manifold Kit
APN ID#: 17806
Funny, it says it has everything you need except for the throttle body gasket.
If you have any more questions, feel free to start a new thread in the 92-99 section.
GM Intake Manifold Kit
APN ID#: 17806
Funny, it says it has everything you need except for the throttle body gasket.
If you have any more questions, feel free to start a new thread in the 92-99 section.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#26
Senior Member
True Car Nut
the dorman kit is on rock auto for like 67. Dorman pn 615-180 is the manifold, comes with the gaskets preinstalled, pcv and injector o-rings but not the upper ones so autozone had a oring multipack
#27
Retired
I think is he looking for the upper that has the egr correction built in.
#28
Senior Member
True Car Nut
whats the need for the egr, i dont remember specifically having that metal insert but i wasnt looking for it either. i do remember reading something saying it was thicker were it needed to be for the cracking
#29
Retired
It was a simple solution to prevent hot egr gasses from cracking the plastic manifold. The other option is to block the coolant ports on the LIM.