94 Nonneville Tranny no downshift
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Wake Forest, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
94 Nonneville Tranny no downshift
I just bought a 94 Bonneville Se witha problem downshifting. It won't downshift unless you do it manually. From a start or passing
It also has a shudder in low gear if you stomp it.
IT shifts fine as long as you move it to low gear then move it back to OD
I hooked the scanner up and it shows no error codes and no pending codes.
I also monitored it to make sure when i put the selector in each gear that it was showing the correct gear.
Transmission is a 4t60 F17 2.84 gears
car has 163k miles
any suggestions.
It also has a shudder in low gear if you stomp it.
IT shifts fine as long as you move it to low gear then move it back to OD
I hooked the scanner up and it shows no error codes and no pending codes.
I also monitored it to make sure when i put the selector in each gear that it was showing the correct gear.
Transmission is a 4t60 F17 2.84 gears
car has 163k miles
any suggestions.
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rjolly87
have you tried to adjust your TV cable yet?
umm have u checked the trans fluid....and the level of the fluid....interesting that its not throwing any codes...
Also im thinking the TPS may be a cause of this, I TPS with a wacky paramater can cause the trans to shift incorrectly or not at all
#4
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Wake Forest, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I checked the fluid and it'* full. I never replaced the filter yet. I never adjust the cable yet either. I will check it tomorrow. I will also try to check the voltage on the TPS and see what it shows.
I also noticed that sometimes when it'* in park or neutral the torque converter sounds like it tried to lock and unlock. It quits doing that when you put it in any forward gear or reverse.
I also noticed that sometimes when it'* in park or neutral the torque converter sounds like it tried to lock and unlock. It quits doing that when you put it in any forward gear or reverse.
Thread
Thread Starter
Forum
Replies
Last Post