Got my scantool today...
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2004
Location: Spokane, Washington
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Got my scantool today...
Just noticed a few odd things when I was scanning my car for the first time today...
The Quad Driver Module 1 would go to "BAD" anytime I touched the brake pedal. Does this mean I have a brake light out or something? I dont even have a clue what the QDM is. QDM # 2 seems to be good all the time.
The scanner also says my VATS system is bad. Isnt that the little chip thing on the key that it has to read in order to start? I have had the security light come on a few times while trying to start the car, but they are few and far in-between.
Sooo is there much to worry about and are these things very easy to fix?
Thanks for the help!
Ryan
The Quad Driver Module 1 would go to "BAD" anytime I touched the brake pedal. Does this mean I have a brake light out or something? I dont even have a clue what the QDM is. QDM # 2 seems to be good all the time.
The scanner also says my VATS system is bad. Isnt that the little chip thing on the key that it has to read in order to start? I have had the security light come on a few times while trying to start the car, but they are few and far in-between.
Sooo is there much to worry about and are these things very easy to fix?
Thanks for the help!
Ryan
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Most likely that QDM1 when you touch the brakes is the torque converter releasing. Although I'm not positive of your year and the codes.
On my 95 QDM1 controls boost sol, tcc sol and evap purge sol. If you are in the high 30'* and tap the brakes the pcm tells the tcc to release.
On my 95 QDM1 controls boost sol, tcc sol and evap purge sol. If you are in the high 30'* and tap the brakes the pcm tells the tcc to release.
#4
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBost37
Most likely that QDM1 when you touch the brakes is the torque converter releasing. Although I'm not positive of your year and the codes.
On my 95 QDM1 controls boost sol, tcc sol and evap purge sol. If you are in the high 30'* and tap the brakes the pcm tells the tcc to release.
On my 95 QDM1 controls boost sol, tcc sol and evap purge sol. If you are in the high 30'* and tap the brakes the pcm tells the tcc to release.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
He'* saying it goes "bad" ... he'* not necessarily saying it turns on his check engine light every time. (I read it that the tool says bad for a second..but no light)
Ryfly.. does it just go bad for a moment and not turn on the light or does this turn on a check engine light?
Ryfly.. does it just go bad for a moment and not turn on the light or does this turn on a check engine light?
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2004
Location: Spokane, Washington
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
The tool says "BAD" but I have no codes and the check engine light does not come on. It does this even if im in park. The reading goes back to "OK" as soon as I let off the brake.
Thread
Thread Starter
Forum
Replies
Last Post
95BonnevilleSESC
Lounge
14
01-29-2004 08:18 AM