auto dim mirror question
I hope this in the right section, i replaced, the manual dim mirror in my 99 SLE with an auto dim from my 94, eveything went great (tied power and ground into the overhead console accessory plug which is switched) except it seems loose and shakes and rattles a little going down the road. i don't see any adjustments and i even tried shimming it with paper, with no luck. I used the existing metal backing plate from the manual mirror, should i have used the one from the sse, or is their a way to adjust it that i am just not seeing
99 Bonneville SLE, panosonic CQ-C7203U HU, 760 watt Pioneer 2 channel amp bridged, 1200 watt 12In sony explode in a sealed box, sony explode 5.25 inch door speakers and sony explode 6x9'* in the rear deck, 1 farad cap, (125 dB) 83,000 miles, , apn upper intake and gm aluminum lower intake gaskits, silverstar ultra high and low beams, dynomax super turbo mufflar, dynomax high flow cat, gutted air-box, Astrostart Remote Starter
hella optics angel eyes with silverstar H3 bulbs
99 Arctic Cat ZR600, black magic pipe and can, 4000 rpm clutch, bored .30 over, 120+ hp..