1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

ATTN: Suspension guys, need help with noise. (FIXED)

Thread Tools
 
Search this Thread
 
Old 02-22-2006, 05:07 PM
  #1  
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 2 Likes on 2 Posts
Toddster is on a distinguished road
Default ATTN: Suspension guys, need help with noise. (FIXED)

Need some help with a noise that’* driving me nuts.
I’m having this clanking noise every time I slow to a stop.
The noise comes from the front of the car, on the left most of the time and the right sometimes.
I had just replaced the endlinks up front because the drivers side was broken.
After I replaced the endlinks the noise seemed to go away for a day but them it came right back.
I had the front and rear suspension looked at and everything else looks good.
Infact both of my Bonneville’* have this noise.
The noise happens whether I stop strait, stop turning left, or stop turning right.
This Applies to my 98 SSEi and my 95 SSE.

Anybody else have this problem or is this a Bonneville thing?

Thanks for your help.-toddster
Old 02-22-2006, 05:10 PM
  #2  
Senior Member
Certified Car Nut
 
1993 SLE's Avatar
 
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes on 0 Posts
1993 SLE is on a distinguished road
Default

endlinks....that is what im thinking
Old 02-22-2006, 05:11 PM
  #3  
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 2 Likes on 2 Posts
Toddster is on a distinguished road
Default

I replaced the endlinks in the SSEi two days ago.
Noise still there-toddster
Old 02-22-2006, 05:14 PM
  #4  
Senior Member
Certified Car Nut
 
1993 SLE's Avatar
 
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes on 0 Posts
1993 SLE is on a distinguished road
Default

Originally Posted by toddster
I replaced the endlinks in the SSEi two days ago.
Noise still there-toddster
ahh i see that, now does the noise constant, or just when turning.....possible wheel bearing on its way out
Old 02-22-2006, 05:15 PM
  #5  
Senior Member
True Car Nut
 
corvettecrazy's Avatar
 
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes on 0 Posts
corvettecrazy is on a distinguished road
Default

Originally Posted by 1993 SLE
Originally Posted by toddster
I replaced the endlinks in the SSEi two days ago.
Noise still there-toddster
ahh i see that, now does the noise constant, or just when turning.....possible wheel bearing on its way out
did you even read what he wrote??

I'm sort of at a loss. Not sure what it could be. How tight did you go on the endlinks?
Old 02-22-2006, 05:16 PM
  #6  
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 2 Likes on 2 Posts
Toddster is on a distinguished road
Default

It happens 90% of the time. When I slow to a stop. Its not constent.
Had everything else looked at and found no failing parts.-toddster
Old 02-22-2006, 05:16 PM
  #7  
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Likes: 0
Received 8 Likes on 8 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

Todd...clanking..over bumps? just stops?

Maybe strut bearings..jack up eash front tire..put hands at 12 and 6..wiggle, then 9 and 3 wiggle.. any movement in either position?
Old 02-22-2006, 05:17 PM
  #8  
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 2 Likes on 2 Posts
Toddster is on a distinguished road
Default

Clanking at slowing to stop. Not over bumps.
I had the strut bearings looked at to.-toddster
Old 02-22-2006, 05:20 PM
  #9  
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 2 Likes on 2 Posts
Toddster is on a distinguished road
Default

I personaly did not put them in, I should ask my mechanic how tight he put them in.
I had them installed when they put the new tranny in.-toddster
Old 02-22-2006, 06:18 PM
  #10  
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Likes: 0
Received 8 Likes on 8 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

I'd say check bearings, tie rods and strut bearings...but clanking..it'* a guess...


Quick Reply: ATTN: Suspension guys, need help with noise. (FIXED)



All times are GMT -4. The time now is 10:25 AM.