1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

knocking motor

Thread Tools
 
Search this Thread
 
Old 11-26-2004, 08:33 AM
  #1  
Junior Member
Thread Starter
 
butlar's Avatar
 
Join Date: Nov 2004
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
butlar is on a distinguished road
Default knocking motor

Hi im new to the forum!!
I was wondering. I own a 1995 series ll 3.8 vin k bonneville. Recently she developed a knocking noise along with a tick, the engine is maintained well and on a regular basis. I replaced the lifters and that solved the tick, and i was told to check the harmonic balancer to solve the knock. Upon inspection the balancers rubber was discintegrated and wore, so i replaced. Upon starting the engine there was no sign of a knock, until engine warmed up slightly or ran for a few minutes, it seems as if the engine idled down, then started knocking and running badly, I am stumped and i was wondering if u guys may be able to help me. Also could a bad crank sensor or timing cause a knock, im uncertain. Finally the oil pressure is fine and engine runs very smoothly. please help!!
thanks
Old 11-26-2004, 12:32 PM
  #2  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

A crank sensor won't cause knock, and timing issues are extremely rare on these cars. Can you tell me if you've ever had the dreaded upper intake vinK problem?
Old 11-26-2004, 04:02 PM
  #3  
Junior Member
Thread Starter
 
butlar's Avatar
 
Join Date: Nov 2004
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
butlar is on a distinguished road
Default

I noticed coolent leak around upper intake awile back! I replaced gasket and there was no sign of cracking on the intake so i never replaced it, also there was no sign of coolent getting into oil.Oil pressure remains the same (good) when engine warms, and there is 250 000 km on engine. I suspect crank bearing now, not good i know, but if so i will be looking for a replacement motor or i gues id have to rip mine apart. I may even try switching to SC if i can find right wiring harness and computer and stuff. Well thats all for now, if u guys know where to get a used motor or have any more suggestions it would be a great help. Thank again!!!!!
Old 11-26-2004, 07:35 PM
  #4  
Senior Member
Posts like a Camaro
 
CmptrNerd's Avatar
 
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes on 0 Posts
CmptrNerd is on a distinguished road
Default

Throw in a strong chassis and a 502 Ram Jet engine is my suggestion.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andamo
1992-1999
9
09-07-2004 08:00 AM
619Bonneville97
1992-1999
5
08-15-2004 02:37 PM
Infrared
2000-2005
5
07-31-2004 11:40 AM
1993SSEi
1992-1999
5
05-06-2004 08:04 AM
bmsgaffer86
1992-1999
2
12-23-2003 08:35 AM



Quick Reply: knocking motor



All times are GMT -4. The time now is 11:13 PM.