"Evaporative Emission System Flow During Non-Purge"
04-18-2006, 08:01 PM
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2004
Location: Central NJ
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
"Evaporative Emission System Flow During Non-Purge"
so i have a p1441 code "Evaporative Emission System Flow During Non-Purge" does that mean it'* an evap leak or does it mean something else?
04-18-2006, 09:05 PM
#2
Junior Member
Posts like a Ricer Type-R
My codes (OBD1) aren't as specific. To me, this would sound like the charcoal canister purge solonoid is stuck in the open position. It COULD also mean you have a vac leak.
Sticky solonoids happen like the *****. Sooner or later, you'll have it, and it'll probably go away.
Keep an eye on it. It'* not a serious issue.
Sticky solonoids happen like the *****. Sooner or later, you'll have it, and it'll probably go away.
Keep an eye on it. It'* not a serious issue.
04-18-2006, 11:05 PM
#4
Junior Member
Posts like a Ricer Type-R
IN the solonoid. Some WD-40. Squirt into the incoming and outgoing vac ports. Then immediately go for a drive.
You might want to clear the code first, then watch for it to return.
You might want to clear the code first, then watch for it to return.
09-06-2009, 01:15 PM
#5
Junior Member
Join Date: Sep 2009
Location: Cecil County Maryland
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
i have the same problem, (EVAP system flow during a non purge condition) on my 98 bonnie se... and so far i havent found a solution, any other tips besides the wd-40, or replacement parts i can find, maby i can get a more detailed explanation of what it exactly does/is?
Thread
Thread Starter
Forum
Replies
Last Post
Merlin 91/97
1992-1999
1
08-11-2004 12:02 PM