99 SSEi Serpentine Belt Replacement
#11
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Apr 2006
Location: Schaumburg, IL
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
This probably should be moved to a new topic, however, If I do end up replacing the water pump, I'm debating on if I should go with the electric pump by Meziere. It looks like it'* worth it. Anyone have any experience with these?
http://www.3800performance.com/Merch...roduct_Count=1
http://www.3800performance.com/Merch...roduct_Count=1
#12
DINOSAURUS BOOSTUS
Expert Gearhead
I have one sitting at my house.
It appears to do it..you'd need a little piece from a 2000+ that bolts where our ps pump bolts to and pushes the pump to the back about 1.5 inches. When you replace the pump with the electric..your belt path comes off the ps to the tensioner down to the crank pulley. If you look at your current configuration..you'll notice the ps pump/ crank are probably too close to make that happen.
It appears to do it..you'd need a little piece from a 2000+ that bolts where our ps pump bolts to and pushes the pump to the back about 1.5 inches. When you replace the pump with the electric..your belt path comes off the ps to the tensioner down to the crank pulley. If you look at your current configuration..you'll notice the ps pump/ crank are probably too close to make that happen.
#14
DINOSAURUS BOOSTUS
Expert Gearhead
Pretty much. Unless you consider maybe changing how the ps pump mounts to the motor by adding a small piece that the 2000'* have. This piece pushes the pump toward the firewall about 1.5 inches.
Thread
Thread Starter
Forum
Replies
Last Post