Headlight alignment help
#4
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
ok so. do you need help knowing where the adjusters are?
Or what level they need to be at.
if level.
at a distance of 25' the center of your beam should be about 18" off the ground.
if where they are..
open your hood and look down at the HL'*. you will see two Torx bits. those are them. just turn.
Or what level they need to be at.
if level.
at a distance of 25' the center of your beam should be about 18" off the ground.
if where they are..
open your hood and look down at the HL'*. you will see two Torx bits. those are them. just turn.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2005
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by badnit
ok so. do you need help knowing where the adjusters are?
Or what level they need to be at.
if level.
at a distance of 25' the center of your beam should be about 18" off the ground.
if where they are..
open your hood and look down at the HL'*. you will see two Torx bits. those are them. just turn.
Or what level they need to be at.
if level.
at a distance of 25' the center of your beam should be about 18" off the ground.
if where they are..
open your hood and look down at the HL'*. you will see two Torx bits. those are them. just turn.
#6
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post