car shuting off while in freeway speeds!!!!
10-14-2007, 11:49 PM
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Feb 2007
Location: Castroville/Sacramento,CA,tampa,florida
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
car shuting off while in freeway speeds!!!!
guys my car is shutting of while im going at least faster than 45 at the city or highway,wtf is going on,im puzzled?i need some feedback!!
10-15-2007, 07:28 AM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
We are going to need a bit more info to be helpful.
Does it sputter, simply die, how long until restart etc?
We can list 100'* of things from fuel filter to crank sensor and even a bad ground. Please tell us what diagnosis you have done and we can help better from there.
Does it sputter, simply die, how long until restart etc?
We can list 100'* of things from fuel filter to crank sensor and even a bad ground. Please tell us what diagnosis you have done and we can help better from there.
10-16-2007, 12:17 AM
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Feb 2007
Location: Castroville/Sacramento,CA,tampa,florida
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
well,i have add a scanner,and it tells me that my cam sensor has a bad signal,and sometimes it tells me something about my torque converter.the mods i have on my car are,CIA,80series exhaust,2.2 pulley,oh and the trans is from a 92 se and i have a 93 ssei.
10-16-2007, 12:38 AM
#4
Senior Member
Certified GM nut
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
well if you have the stock ecu, then its confused right now. its not programmed for the extra boost. i would use that scan tool and be certain you have to KR issues.
and that 93 pcm will run the eng with a complete loss of cam signal. it goes to the last setting when it last had a cam signal and uses that as a default. but still only gets 1 out of 6 pulses right (says the fsm).
but what exactly does ur car do when it dies, and how long before it will start back up?
and that 93 pcm will run the eng with a complete loss of cam signal. it goes to the last setting when it last had a cam signal and uses that as a default. but still only gets 1 out of 6 pulses right (says the fsm).
but what exactly does ur car do when it dies, and how long before it will start back up?
10-16-2007, 08:25 AM
#5
DINOSAURUS BOOSTUS
Expert Gearhead
The added boost won't cause it to stall and isn't confusing the computer.
The different transmission with different gear ratio is probably causing the TCC issues and possibly a couple others. Not the stalling issue though.
I'd suggest fixing the cam signal issue.
As for the stalling.. the biggest problem we find that causes this is battery cable corrosion. Remove and clean all cable ends from both the battery and other ends. Remove the bolt and boots from the cables to clean them and reinstall the boots and bolt before reattaching at the battery end. You will also want to remove your coil packs and clean the plate under them.
The different transmission with different gear ratio is probably causing the TCC issues and possibly a couple others. Not the stalling issue though.
I'd suggest fixing the cam signal issue.
As for the stalling.. the biggest problem we find that causes this is battery cable corrosion. Remove and clean all cable ends from both the battery and other ends. Remove the bolt and boots from the cables to clean them and reinstall the boots and bolt before reattaching at the battery end. You will also want to remove your coil packs and clean the plate under them.
10-17-2007, 01:13 AM
#6
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Feb 2007
Location: Castroville/Sacramento,CA,tampa,florida
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
ok when the car dies i pull over and restart the car and its that easy,but i dont get it,why does it die?i have to fix that dam cam sensor.
10-17-2007, 01:41 AM
#7
Senior Member
Posts like a Turbo
Join Date: Oct 2006
Location: Twin Lake, MI
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
As for the stalling.. the biggest problem we find that causes this is battery cable corrosion. Remove and clean all cable ends from both the battery and other ends. Remove the bolt and boots from the cables to clean them and reinstall the boots and bolt before reattaching at the battery end. You will also want to remove your coil packs and clean the plate under them.
I had the same problem and the cable cleaning made it go away.
edited (ps -- if the battery cable cleaning doesn't work, then start going through the ground connections -- there'* a bunch and they are well documented in the forums if you do a search. Use BillBoost37 and willwren as authors. "Boosty" says he is not only the president of the "clean up your ground connections" club, but is also a member :? Even if all that work doesn't do the job, it'* great preventitive maintenance for the old cars we want to keep going forever
)
10-19-2007, 12:15 AM
#9
Senior Member
Certified Car Nut
Posts split to another thread.
Originally Posted by SSEi93
,now back to my issue,when my car shuts off,all the lights,and stuff is normal,with the diffrence that the engine aint on,and you know when you have your car in Engine off,ignition on,and the lights are on,like the check engine light,and the check gauges light,well,trhose same lights are on when my car turns off.oh,and a couple of months ago,i broke my mounting plate of my fuse box.You guys know how the fuse box on the left side of the 93 bonneville is,in order to open it,you have to bring it down,well mine was down,but my E-brake was on,so when i pulled my E-brake off,it smaked the fuse box,and broke its mounting place.Now my point is,do you guys think maybe a wire came loose in the fuse box?
10-19-2007, 12:21 AM
#10
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Feb 2007
Location: Castroville/Sacramento,CA,tampa,florida
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
like i was saying,i accedently broke my fuse box'* possition were it goes.ok,well,you know how the 93 SSEi fuse box goes down to view the fuses,well one day i left it down while my E-brake was on and when i released my E-brake,i hit the fuse box,and it broke it.you guys think that maybe theres a loose connection,and maybe thats whats making my carturn off?