Hey there, I just had to pull this on my '87, this was how mine went. I had to pull the lock actuator, which was held by 2 rivets, and if memory serves me, I believe there were 5 rivets, 3 on the regulator motor, and 1 at the bottom of the reg tape guide and 1 at the top, near window sill. Make sure you have the window clamped into the top of the window-frame, this will make the re-install a bit easier, and you will need to power the regulator to feed the new tape (I'm guessing your job) after it comes out of the door. My assembly all came out in one piece,reg and guide. This job was a bit of a pain. Good luck.
Last edited by backhoe; 08-09-2009 at 11:13 AM.