1990 v8 bonneville
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
1990 v8 bonneville
any body ever seen a rear wheel drive v8 conversion done to a bonneville? im really considering doing this.i realize all the cutting and custom fab work that would have to be done,ive helped on projects like this before.just never o a bonneville,i have a 1990 bonne just wating for this to be done.i keep seeing all these ford focuses with 305 v8s in them so i know if its possible to do that to a car that small it can be done to a bonne.if you know of a site or anything please let me know.
#2
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
keep in mind i dont care that i have to cut up the floor firewall etc... this is in no way a show car ,i just want a sleeper with a chevy small block rumble.this is just my beater cxar so no matter what has to be done i dont care.
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ssesc93
You said an 8 cylinder Ford Focus?
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
here is a few pics of a pretty sweet v8 conversion focus
can see the rear end in this pic
if you want to see more pics go here http://www.cardomain.com/member_page...=321109&page=1
can see the rear end in this pic
if you want to see more pics go here http://www.cardomain.com/member_page...=321109&page=1
#6
Senior Member
Expert Gearhead
Re: 1990 v8 bonneville
Originally Posted by detrain
any body ever seen a rear wheel drive v8 conversion done to a bonneville? im really considering doing this.i realize all the cutting and custom fab work that would have to be done,ive helped on projects like this before.just never o a bonneville,i have a 1990 bonne just wating for this to be done.i keep seeing all these ford focuses with 305 v8s in them so i know if its possible to do that to a car that small it can be done to a bonne.if you know of a site or anything please let me know.
Good luck
#7
Originally Posted by detrain
here is a few pics of a pretty sweet v8 conversion focus
can see the rear end in this pic
if you want to see more pics go here http://www.cardomain.com/member_page...=321109&page=1
can see the rear end in this pic
if you want to see more pics go here http://www.cardomain.com/member_page...=321109&page=1
#8
Junior Member
Posts like a Ricer Type-R
I'd say right off the bat, you have more room to work with than a focus does. Small block and good GM rear end should be cheaper, too.
You thinking manual, or stick with the auto? A clutch conversion would add alot of work, but an Auto might be an easy thing. A custom linkage should do it.
You thinking manual, or stick with the auto? A clutch conversion would add alot of work, but an Auto might be an easy thing. A custom linkage should do it.
#9
Member
Posts like a V-Tak
Join Date: Jul 2003
Location: S/W Michigan
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Now were talkin! I got a couple ideas....
4.3V-6 RWD, get freaky & add a turbo or two! It would be a tad shorter than the V-8, I would think that would help a lot unless your planning on moving the engine back further in the chassis. A LS1 would look wicked in there though & be more "stealthy" though. Sticking with a Pontiac motor would be cool, but they are all huge.
4.3V-6 RWD, get freaky & add a turbo or two! It would be a tad shorter than the V-8, I would think that would help a lot unless your planning on moving the engine back further in the chassis. A LS1 would look wicked in there though & be more "stealthy" though. Sticking with a Pontiac motor would be cool, but they are all huge.
#10
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
well these are pretty much my plans right here,im probably goinna start out with a stock carburated 350, (tight on money), either a 700r4 or 350 turbo tranny.but after much though i figured i would probably have to do a custom 4 link set up in the rear.and for sure a posi rear end,but im not sure which one.Just to let everyone know this isnt a for sure thing,depends what kind of money im gonna have in the next few weeks.