Backfired
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Waterford, Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Backfired
A couple days ago my car backfired. completely screwed up the muffler. now, my 88 bonneville wont even start. every time I try to start it now it backfires. an ideas why?
#2
Senior Member
Certified Car Nut
Although rare in these engines, it could be your timing chain jumped a tooth or two, or an exhaust valve broke... Do you hear anyother weird noises? Did you change anything recently like spark plug wires? Can you pull the plugs to see what they look like or get it compression tested?
#3
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Waterford, Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
My dad was telling my that the timing chain might be off, unfortunately i dont have a cherry picker to get my engine out of the chassis to check. i havent changed anything on it recently, except for the headlight i replaced a month ago, and the radiator over a year ago. i should prolly check the wires though. how do i get a compression check?
#4
Senior Member
Certified Car Nut
A lot of normal auto shops can do it. Or you can get a compression tester. You could try pulling one fuel injector connector at a time to see if the backfiring goes away. You might be able to narrow it down to one cylinder that way.
#5
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Waterford, Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
ok cool thanks ill try that. my neighbor will be home in a few hours so ill ask him to barrow his cherry picker. ive heard from a few people that its more than likely the timing chain so ill try that first. man, this car has been nothing but a bunch problems for me since i got it a year and a half ago :/
#6
Senior Member
Certified Car Nut
I'd try the injectors first. If pulling one makes it go away, I'd think the timing was fine. And the timing chain can be replaced without yanking the whole engine.
#8
Senior Member
Certified Car Nut
I can't remember right now if your engine would have a motor mount on that side. If there is, you'll need to support the engine from below with a jack (and a piece of wood to distribute load) and raise the belt end a bit. Or, now that I think about it, the cherry picker could be used for that. If you don't have the torque axis mount, you shouldn't have to do that at all. Just take the belt off, drain the coolant, and start removing bolts. Remember to change the oil before you start it afterwards though. It'* easy to dump coolant into the oil pan when removing the timing cover.
#10
Senior Member
Posts like a Turbo
Join Date: Jul 2007
Location: Joplin, Missouri
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
The timing chain is fairly easy to do, just time consuming. They should be replaced every 100k miles or so. How many miles are on yours?
Also, what kind of shape are your plug wires in? What brand are they? Are all your coils good?
Heres an excellent write-up on how to do the TC: http://www.lesabret.com/phpBB/viewtopic.php?t=5516
Also, what kind of shape are your plug wires in? What brand are they? Are all your coils good?
Heres an excellent write-up on how to do the TC: http://www.lesabret.com/phpBB/viewtopic.php?t=5516