Dealing with broken engine cradle bolts...any help to you?
05-08-2008, 10:58 PM
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: Dimondale, MI
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Dealing with broken engine cradle bolts...any help to you?
http://forums.aaca.org/ubbthreads.ph...075#Post508075
On the AACA/Reatta.net board I'm posting on my dealing with broken engine cradle bolts...PITA to say the least but I've got some info and pix...it'* on an '89 E-body though...is it of any use to you guys?
On the AACA/Reatta.net board I'm posting on my dealing with broken engine cradle bolts...PITA to say the least but I've got some info and pix...it'* on an '89 E-body though...is it of any use to you guys?
05-09-2008, 02:50 PM
#2
Senior Member
True Car Nut
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
just an FYI, when cutting a window like that, you are better off with rounded corners because they are stronger than the right angles and don't reduce the panel strength as much.
I have to do this on my acura sometime
I have to do this on my acura sometime
Thread
Thread Starter
Forum
Replies
Last Post
raptor660
Audio (and aftermarket electronics)
4
01-30-2011 06:45 PM