how do i mount the delco coils and module on my 88 sse?
07-10-2007, 11:17 PM
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
how do i mount the delco coils and module on my 88 sse?
hi i want to do the delco swap on my 88 bonnie and i have the right icm that matches the clip on my 88 and i have 3 new delco coils and new delco plugs and wires.
but how do i mount the new icm? it has 6 holes to mount and my bracket on the 88 only has 3 to mount the icm.? how do i mount the new delco upgrade. i see many did it but i cant see exactly how they mounted it... thanks
but how do i mount the new icm? it has 6 holes to mount and my bracket on the 88 only has 3 to mount the icm.? how do i mount the new delco upgrade. i see many did it but i cant see exactly how they mounted it... thanks
07-11-2007, 12:28 AM
#2
Guest
Posts: n/a
You need this Plate with the mounting bolts
The ICM will sit on top of the plate, like this
The you install the coils onto the ICM and Bolt them down
Then you are ready to install
Being that all you need is the Plate and the screws, you can get the Plate from any 89-93 3300 Buick V6 ( 8th didget of the vin will be a N ) or any 93-95 3800..... Make sure you get the screws for both the mounting plate and the coils as you will need them for the swap.... Hope that helps
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
The ICM will sit on top of the plate, like this
The you install the coils onto the ICM and Bolt them down
Then you are ready to install
Being that all you need is the Plate and the screws, you can get the Plate from any 89-93 3300 Buick V6 ( 8th didget of the vin will be a N ) or any 93-95 3800..... Make sure you get the screws for both the mounting plate and the coils as you will need them for the swap.... Hope that helps
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
07-11-2007, 01:01 AM
#3
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
thanks bro your the man.. what do youo think of the delco swap and a better stronger high performance exhaust system with some 16'' rims that weigh 15.5 pounds each on my 88 sse.. would that better the performace?
07-11-2007, 01:11 AM
#4
Guest
Posts: n/a
It may help a little... Go no more than 2.5" on the exhaust... When you get the Type II installed, try out a set of the NGK TR55'*... And get a set of Plug wires for a 1993 Bonneville.... They will fit properly with the Type II coils... Get the intake and exhaust to flow a little better...
That 2.97 ratio should be the best all around ratio for the LN3
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
That 2.97 ratio should be the best all around ratio for the LN3
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
1987-1991
5
03-10-2005 11:34 PM
bill buttermore
Everything Electrical & Electronic
12
04-28-2004 11:36 AM